Dynamic Resonant Mode Operation & Zero-Point Voltage Switching
Our manufacturer has designed an exclusive technological approach to Ozone (O3) generation.
Introducing the next generation ozonator...
We use two advanced technologies which we call Dynamic Resonant Mode Operation (DRMO) and Zero-Point Voltage Switching (ZPVS).
Our Fused Quartz Crystal (99.995% pure quartz crystal) Ozone Tube has a natural resonant frequency. The resonant frequency is determined by, among other properties, the length and diameter of the tube, the dielectric properties of the high-grade Fused Quartz Crystal (dielectric constant = 3.75, dielectric strength = 50,000,000 Volts/metre) Generating Chamber, material aging, humidity, barometric pressure, and temperature, etc. Coupled with the secondary windings of our high-frequency Tesla fly-back transformer, the ozone tube creates a series-resonant tank circuit. This produces a 14 kHz pure sine-wave of 8,500 Volts P-P across the ozone tube. This in turn creates the cold plasma / cold corona discharge. This plasma discharge glows a deep violet colour. When air that contains oxygen (normal air we breath) passes through the plasma field, the oxygen (O2) molecules are converted into high energy ozone (O3) molecules.
Previous ozone generator designs required that high-frequency ozone tubes be carefully tuned to the resonant frequency of the transformer through the use of precise oscillator. Periodic adjustments of the oscillator were needed to ensure the ozone tube remained in the resonant zone to maximize ozone output. Or alternately, if the manufacturer decided not to use a high frequency resonant-tuned circuit and instead designed around the standard 60 Hz using a neon sign transformer, then efficiency dropped noticeably and the weight and size of the transformer (and the rest of the power supply) rose rapidly. Direct operation from 12 Volts DC was out of the question. This design approach describes your typical ozone generator on the market today.
Our manufacturer took another approach...
We incorporated a dynamic (or "hunting") resonant mode circuit (DRMO) that continually monitored the ozone tube's natural resonant frequency. Our circuit continuously adjusts the frequency of the Tesla high-voltage transformer to precisely match that of the ozone tube's natural frequency. This unique and proprietary design allows for an ozone tube that is unaffected by changes in the tube's resonant frequency due to changes in: material aging, humidity, barometric pressure, temperature, etc. The result is a near constant, and consistent ozone production. Additionally, there is never a need to "tune" the circuit as it is self-tuning and always maintains maximum output.
The second breakthrough design made use of Zero-Point Voltage Switching (ZPVS). Our ozone tube is ignited by a pure sine-wave of high-frequency, high-voltage electrical energy. A sine-wave by nature has nodes where the voltage crosses the zero-point, reverses direction and completes the sine-wave.
Click on image to enlarge it
We took advantage of the zero-crossing point to switch our high frequency Tesla transformer precisely at these zero-point nodes. By switching the transformer's primary at the zero voltage point (with high-speed MOSFETs) we virtually eliminate voltage induced losses and stresses. The result is our main transformer drive circuit runs at full power without the need of any heatsinks whatsoever. Actually, during operation of the WOZ3 ozonator the MOSFETs are only luke-warm to the touch! This breakthrough design approach allows for extreme efficiencies and reliability.
The final result of our efforts is a new generation ozone unit that is directly powered by 12 Volts DC; is extremely lightweight and portable; generates a very strong, pure and consistent ozone output; and has outstanding efficiency and reliability.
Copyright 2007 Tools for Healing, LLC. All Rights Reserved. Revised: February 2007
All Credit Card transactions are protected by a secure server. Your personal information is encrypted and cannot be read by anyone. If you do not feel comfortable placing an order over the internet please feel free to fax it to 423-899-6660 or call our 24 hour phone order line at 800-975-9633.
Privacy Statement |
Return PolicyQuestions or Comments? E-mail:CustomerService@toolsforhealing.com
ALL content on this site is informational in nature and is not to be taken as medically or scientifically proven. The ideas and opinions of the owner and others are expressed throughout and are not offered as medical advice for the treatment or cure of any disease. No guarantees of effectiveness are offered. Please consult a licensed physician for any medical situation.
We encourage you to educate yourself before making a purchase. When ill, it's easy to be motivated from desperation rather than information. We believe in self-responsibility, for ourselves and our customers. Your decisions and your health belong to you. We would rather you not purchase from us if you expect a "miracle". Miracles happen, but we don't sell them.
If an item purchased from us has not been used and is returned to us within 30 days in a re-sellable new condition, we will refund the full purchase price, minus all shipping costs. We reserve the right to charge up to a 15% restocking fee on any return for damage or use. By purchasing from our site and/or viewing these pages you accept and agree
to these terms.
All Credit Card transactions are protected by a secure server. Your personal information is encrypted and cannot be read by anyone. If you do not feel comfortable placing an order over the internet please feel free to fax it to 423-899-6660 or call our 24 hour phone order line at 800-975-9633.