We now carry the complete line of SilverGencolloidal silver generators - widely recognized as some of the best generators available for the money. With constant-current output, auto shutoff, and built-in stirring motors, they can't be beat. Click here for details.
If you are serious about your colloidal silver don't forget to look at the Hanna PWT meter. If you want to know what PPM silver you are making, the PWT meter is the only inexpensive way to do with reasonable accuracy.
To make high quality colloidal silver you MUST use steam distilled water. Many store-bought brands of distilled water vary too much in their quality, making it difficult to produce a consistent quality. The only way to guarantee what you are getting is to make your own distilled water. We now have an excellent low-cost steam distiller that's only $109 plus shipping. Click here for details.
NOTE: On November 29, 2000 SOTA received this e-mail message from the Canadian Health Protection Branch (HPB) regarding our Silver Maker unit "...please be informed that the Silver Maker does not meet the definition of a "device" as defined in the Food and Drugs Act. R.S., c. F-27, s. 1. The Silver Maker is therefore not subject to the regulatory requirements of the Canadian Medical Devices Regulations."
What is The Silver Maker?
The Silver Maker is an electronic unit which generates top quality Ionic-Colloidal Silver. This is achieved by using only the highest grade .9999 Pure Fine Silver Electrodes. Click here to see what .9999 really means and why others may be misleading with their statement of purity.
Each Silver Maker is a professionally designed quality unit, thoroughly tested and guaranteed to operate per specifications.
The Silver Maker generates the finest qualityIonic-Colloidal Silver at a rate of 3-5 PPM (part per million) in 2 hours for 16 ounces of distilled water, with an Ionic-Colloid silver particle size that is mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope).
To see independent lab tested results of our Ionic-Colloidal Silver as an anti-bacterial solution please click HERE.
New features of the latest Model CSG5 include:
New streamlined unit.
Quartz crystal Micro-Computer controlled functions for accurate timing sequences.
Built-in Constant-Current Circuit for the Ionic/Colloidal Silver Output.
Built-in 2 Hour Timer. Green lights show progress every 30 minutes.
Unit turns itself OFF after the 2 Hour Timer has completed. Set it and forget it!
Orange LED Light indicates when the current through the Silver Wires and is functioning correctly.
Special DIN style jack to comply with new government regulations
Soft carrying case
A unique circuit design allows The Silver Maker to operate from a single 9 Volt alkaline battery. The state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Maker.
Constant-Current Output: Output is 1.5mA +/- 0.5mA
Constant-Voltage Output: Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall adapter, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will remain at 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.
We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production.
Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.
3 Year Parts and Labor Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and other probes are available.
The Silver Maker is housed in a custom plastic enclosure, with a built-in compartment for the 9V battery. A slide-off lid allows you to change the battery easily. A series of Green LED lights indicates the elapsed time the unit is on. Minutes ON are shown at 30, 60, 90 and 120 minutes (2 hours). The Silver Maker will turn off silver production at the end of 2 hours (120 minutes). An OrangeLED Light is used to indicate the Ionic-Colloidal Silver production is underway and an electrical circuit has been established. A Red LED Light indicates Low Battery.
The Silver Maker has two jacks, one for plugging in the Fine Silver Wires and another for hooking up an AC-DC Wall Adapter or other external power source, so you don't have to go through batteries. The Silver Wire cord is about 4 feet long and is very flexible.
The Silver Maker is packaged in a soft carrying case for easy storage.
The Silver Maker is designed to the highest standards. We have improved on the design with added features. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source, such as an AC-DC Wall Adapter, which you can purchase from any electronics store.
Battery Voltage: 9 Volts DC (Alkaline Battery).
Optional Input Voltage: 6 - 12 Volts DC @ 500mA Wall Transformer/Adapter, Automobile Battery, or Solar Panel.
Output Voltage at Colloidal Silver Probes: 31 Volts DC, +/- 1 Volt Constant-Voltage Output
Output Current (Constant-Current): 1.5mA (+/- 0.5mA) Constant-Current Output
Ionic-Colloid Silver Production: 3 - 5 PPM (parts per million) for 120 minutes (2 hours) for 16 ounces distilled water.
Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
Ionic-Colloid Silver Color: Clear or Pale Gold when using our constant-current method.
Silver Wire Life: Can make many gallons of 3 - 5 PPM ionic-colloidal silver per set of Silver Wires, when made as directed.
The Fine Silver Wires are 14 AWG (1.63 mm or 0.064" dia.) x 8" long (1.5 mm diameter x 20.3 cm long) and are constructed of only Pure Fine (.9999 pure) Silver Wire.
Weight of The Silver Maker unit is only a few ounces - very lightweight.
Each Silver Maker comes complete with:
The Silver Maker unit
Two (2) .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes
One (1) International AC-DC Wall Adapter (not shipped with a 9 Volt battery)
3 Year Parts and Labor Warranty on internally mounted components
International Voltage (220 or 240 Volt Mains) Requirements
The Silver Maker ships with an International Wall Adapter intended for any voltage from110VAC 60 Hz (North America) to 220/240 Volt AC 50 Hz Mains (as found in International Countries). Thus, you can use your new Silver Maker virtually anywhere in the world.
Additionally, the Silver Maker may also be operated directly from an external 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an adapter cord which plugs into the cigarette lighter and has a Center Positive, 2.1mm Plug.Radio Shack® usually has these adapters.
Options for Powering the Silver Maker
In the event of a power outage here are some options for powering the Silver Maker other than with its 9-Volt DC Alkaline Battery:
The Silver Maker may be operated directly from a 12 Volt DC Battery like from an automobile cigarette lighter. You will need to purchase an adapter cord which plugs into the cigarette lighter and has a Center Positive, 2.1 mm Plug, like from Radio Shack®.
The Silver Maker can be powered by a suitable Solar Panel. Keep in mind that most solar panel generators are used to re-charge a battery which in turn operates the unit. Therefore we suggest you use a solar panel to re-charge a 12 Volt DC automobile battery (preferably a sealed Gel-Cel® type), then run the Silver Maker directly from the battery. You will need to use a cord which has alligator clips on one end to attach to the battery terminals, and the appropriate Center Positive, 2.1 mm Plug on the other end to plug into the Silver Maker. Be careful with polarity! Centre-Positive! This type of cord with alligator clips on one end is probably not readily available, therefore you will to need to buy a cord and cut off the end that normally goes into the cigarette lighter, and solder your own set of alligator clips. Use a black and red alligator clips so you ensure polarity is correct each time you connect the circuit.
If you wish to operate the Silver Maker directly from a solar panel you will need to use a 12 Volt DC rated output panel that is capable of supplying at least 1 Amp of current. The Silver Maker's initial starting demands may require a higher output solar panel. That is why it is preferable to use a charged 12 Volt DC battery instead.
The Silver Maker has a full 3 Year Parts and Labor Warranty on all
internally mounted components. New Silver Wires can be ordered through us.
Copyright 2007 Tools for Healing, LLC. All Rights Reserved. Revised: February 2007
All Credit Card transactions are protected by a secure server. Your personal information is encrypted and cannot be read by anyone. If you do not feel comfortable placing an order over the internet please feel free to fax it to 423-899-6660 or call our 24 hour phone order line at 800-975-9633.
Privacy Statement |
Return PolicyQuestions or Comments? E-mail:CustomerService@toolsforhealing.com
ALL content on this site is informational in nature and is not to be taken as medically or scientifically proven. The ideas and opinions of the owner and others are expressed throughout and are not offered as medical advice for the treatment or cure of any disease. No guarantees of effectiveness are offered. Please consult a licensed physician for any medical situation.
We encourage you to educate yourself before making a purchase. When ill, it's easy to be motivated from desperation rather than information. We believe in self-responsibility, for ourselves and our customers. Your decisions and your health belong to you. We would rather you not purchase from us if you expect a "miracle". Miracles happen, but we don't sell them.
If an item purchased from us has not been used and is returned to us within 30 days in a re-sellable new condition, we will refund the full purchase price, minus all shipping costs. We reserve the right to charge up to a 15% restocking fee on any return for damage or use. By purchasing from our site and/or viewing these pages you accept and agree
to these terms.